PRODUCTS

-PRODUCT CENTER-

Product Series

HZD Pneumatic Hard Arm Robotic Arm

Here is the title one h1 placeholder text

Classification:

Rigid Arm Power Manipulator

Product Details

Details

The HZD pneumatic robot arm uses compressed air as its power source, and the whole machine is pure air controlled and does not require electricity.

Product Introduction

The HZD pneumatic robot arm uses compressed air as its power source, and the whole machine is pure air controlled and does not require electricity.

The robot arm uses special mechanical parallel levers and pneumatic balance principles to lift heavy objects. Combined with non-standard customizable fixtures, it can meet the handling needs of various loads within 500kg. (See the table below for specific parameters)

● Use compressed air as the power source ≥ 0.7Mpa

● Easy installation:

It can be installed by yourself and can be used after connecting to the air source.

● Controller is optional

A. Automatic floating type B. Floating preset type C. Button type

● Good balance effect:

When stopped at any time, the machine will be in a balanced state, which is convenient for the operator to manually adjust the workpiece.

● Optional installation method

A. Column fixed type B. Ceiling type C. Track type D. Trolley movable type

● High security:

Even if the external air source is suddenly cut off, the workpiece will not fall immediately, ensuring the safety and integrity of personnel and items.

● The swivel joint can be equipped with an angle limiter and brake

● Explosion-proof function:

Using full pneumatic control, there is no danger caused by electrical sparks.

● Can be used in explosion-proof areas

● Smooth transfer:

Low noise, no vibration or inching to cause unnecessary trouble

● Each of our robotic arms is equipped with safety features such as air-break protection, air release prevention, misoperation prevention, low-pressure alarm, and stall prevention.

Product Parameters

model	Arm span (mm)	Minimum turning radius (mm)	Load (kg)	Lifting stroke (mm)
ARCHER-HZD2500	2500	700	500	1500
ARCHER-HZD2800	3000	800	500	1700
ARCHER-HZD3000	3500	900	400	1700
ARCHER-HZD3200	4000	900	400	1800
ARCHER-HZD3500	4500	1100	360	1800
ARCHER-HZD4000	5000	1300	300	2000
Power Source	Compressed air ≥0.7Mpa
Lifting method	Drag suspension lift/lever control lift
Horizontal movement	Manual push, pull and drag
Suspension method	Preset suspension/automatic suspension/one-key suspension
Security protection	Air cut-off protection, anti-stall, joint brake, air anti-release, joint limit
Installation	Column type, ceiling type, aerial track type, ground movable type

Our solutions fully meet the different needs of each customer and are tailor-made. From the height, lifting stroke, load capacity, clamping method to the appearance color of the equipment, they are all customized according to the on-site space and needs.

We are committed to solving the labor-saving handling and assembly of goods within 1500kg. Our experienced team ensures the success of your project.

Since our founding, we have been providing our customers with solutions in labor-saving handling and assembly. You can also draw on our expertise and project experience in the following materials.